Dragon Additional or Replacement Flap
- Replacement flap for all Dragon pet door models, or upgrade your single-flap door to double-flap
- Includes sturdy, two-piece flap and all required hardware
- Translucent, polyolefin elastomer flap is comfortable for pets to use
- Easy installation, no need to remove pet door frame
- Available in Medium and Large flap size
Product Details
The Dragon Pet Door Flap Kit comes with everything you need to swap out a well-used Dragon flap for a brand-new one without having to replace the entire pet door assembly. Plus, this kit can upgrade all Dragon Pet Doors from a single to a double flap for improved insulation. Because the flaps install on the outside of the pet door frame, replacing an old flap or adding an additional flap to your Dragon door model is quick and easy-- no need to uninstall your frame. This means that your dog and cat can get back to using their door in no time.
Size Chart
| Flap Size | Outside Frame Dimension | Flap Dimensions |
|---|---|---|
| Small | Coming 2023 | Coming 2023 |
| Medium | 11 5/8"w x 20"h | 7 1/16"w x 13 1/16"h |
| Large | 14 1/8"w x 23 1/2"h | 9 3/8"w x 16 9/16"h |
Installation Instructions
Difficulty
Easy
Steps
05
Time Required
0.5 Hours
Sections
02
Flags
01
Parts
- 1 Dragon Main Inner Flap - flexible, rectangular piece with the Dragon logo
- 1 Dragon “U” Outer Flap - narrower flexible piece shaped like the letter “U”
- 5 thread-Forming Screws - ½” long screws
- 4 Frame Strike Plates - ½” x 1 ¾” steel plates with adhesive backing
Tools
- None
Replacing the Flap
Step 1 Remove Screws
- Remove the two screws holding in the U-shaped outer flap from the frame with a Phillips-head screwdriver.
- If the screw head gets damaged, you can replace it with a new screw from the kit later.
Step 2 Remove Flap
- Remove the old U-shaped flap, then remove the three screws holding the main inner flap.
- Discard any damaged screws as necessary.
Step 3 Remove Magnets
- Separate the magnets from your old flaps.
- Unfortunately, the magnets must be sent to the trash, but your old flaps are recyclable.
- Contact your local waste management and ask if they can recycle polyolefin elastomers or flexible polyethylene.
Step 1 FLAP INSTALLATION Main Flap
- Install the main inner flap onto the frame with the three center screws. The logo should face you, away from the frame.
- The flap material will start to deform when overtightening begins.
Step 2 U-Shaped Flap
- Install the U-shaped outer flap onto the frame with the two remaining screws.
- The magnets should face towards the main flap and the frame.
- Installation complete! If the flaps don't sit quite right off the bat, you can try massaging them into place.
Difficulty
Easy
Steps
05
Time Required
0.5 Hours
Sections
02
Flags
02
Parts
- 1 Dragon Main Inner Flap - flexible, rectangular piece with the Dragon logo
- 1 Dragon “U” Outer Flap - narrower flexible piece shaped like the letter “U”
- 5 thread-Forming Screws - ½” long screws
- 4 Frame Strike Plates - ½” x 1 ¾” steel plates with adhesive backing
Tools
- None
Installing an Additional Flap
Step 1 FRAME PREPARATION Remove Liner
- Remove the paper liner from one of the frame strike plates.
Step 2 Locate Recesses
- Locate one of the four rectangular recesses in the empty frame where the strike plate will go.
- You will want to to place the plate in the center of the recess lengthwise, and towards the frame opening short-wise.
Step 3 Adhere Strike Plates
- Press only one end of the strike plate down with your other hand, ensuring it stays straight.
- Run your finger across it, applying pressure, to ensure it has a good hold.
- Repeat for the other three strike plates.
Step 1 FLAP INSTALLATION Main Flap
- Install the main inner flap onto the frame with the three center screws. The logo should face you, away from the frame.
- The flap material will start to deform when overtightening begins.
Step 2 U-Shaped Flap
- Install the U-shaped outer flap onto the frame with the two remaining screws.
- The magnets should face towards the main flap and the frame.
- Installation complete! If the flaps don't sit quite right off the bat, you can try massaging them into place.
FAQ
|
Do you sell any replacement flaps? Yes, we carry replacement flaps for our doors. |
|
Can my large and small dog share this pet door? Yes, but before you purchase, make sure to follow sizing guidelines and measure your pet before purchasing. Make sure the size of the door is based off your tallest pet, but installed low enough for your smallest pet. |
|
How do I know what size will be best for my dog? You want to make sure that the top of your new pet door clears your dog's back by 1-2 inches minimum. Make sure the step-over is less than 1/3 of your dog's height in order to ensure that the pet door is as comfortable for your dog to use as possible. Lastly you want the width of the door to be wide enough to allow your dog and cat to go through without touching the sides. Here's a guide on how to measure your pet with tips on how to determine the correct size. |
|
I want to get the large pet door for my dog, but I am worried that a burglar could fit through it. Every Dragon Pet Door comes with a locking cover. This cover can be used to keep your dog in as well as keep intruders from entering your home. |
|
What’s the difference between a door mount and a wall mount? While the flaps and frames are mostly the same, each comes with different hardware that allows you to either install into a regular door or a wall |
|
Is there a difference between the single flap and the double flap? The double flap option provides increased insulation against the cold. Both options have magnets on the flap to keep the door sealed in wind. |
|
Where can a Dragon Pet Door be installed? The Dragon Pet Door has multiple Installation options, such as: in , as a Wall mount, Aluminum Sliding Doors, Vinyl Sliding Doors, Sash Windows, Vinyl Windows, and Horizontal Windows. |
Warranty
Dragon Pet Doors One Year Warranty
Dragon Pet Doors have a one-year warranty for normal wear & tear and manufacturing defects.
Customer Reviews
Easy to replace
A friend's puppy had chewed the original flap. Bought this replacement. It took me all of 5 minutes to remove the old one and put the new one in and now everything is perfect again.
United StatesVery easy to swap out
Easy to install, nice to have new flaps on door for winter
United StatesReplacement easy to install
Dogs broke first door outer flap. Also added better magnets to help keep the flaps closed when the wind blows. We will see if this modification helps.
United StatesTough as nails, unless you mess up.
Great , wife put the panel on the wrong side and the dog eat the flaps up trying to get in. The replacement flaps fit perfectly and are working as they should.
United StatesNot to bad
Good door the magnets Need to be stronger , about 1/2 the time have to push back against each other, and a good breeze with push open ! Make sure you buy 2 for inside and out
Size Chart
| Flap Size | Outside Frame Dimension | Flap Dimensions |
|---|---|---|
| Small | Coming 2023 | Coming 2023 |
| Medium | 11 5/8"w x 20"h | 7 1/16"w x 13 1/16"h |
| Large | 14 1/8"w x 23 1/2"h | 9 3/8"w x 16 9/16"h |
Difficulty
Easy
Steps
05
Time Required
0.5 Hours
Sections
02
Flags
01
Parts
- 1 Dragon Main Inner Flap - flexible, rectangular piece with the Dragon logo
- 1 Dragon “U” Outer Flap - narrower flexible piece shaped like the letter “U”
- 5 thread-Forming Screws - ½” long screws
- 4 Frame Strike Plates - ½” x 1 ¾” steel plates with adhesive backing
Tools
- None
Replacing the Flap
Step 1 Remove Screws
- Remove the two screws holding in the U-shaped outer flap from the frame with a Phillips-head screwdriver.
- If the screw head gets damaged, you can replace it with a new screw from the kit later.
Step 2 Remove Flap
- Remove the old U-shaped flap, then remove the three screws holding the main inner flap.
- Discard any damaged screws as necessary.
Step 3 Remove Magnets
- Separate the magnets from your old flaps.
- Unfortunately, the magnets must be sent to the trash, but your old flaps are recyclable.
- Contact your local waste management and ask if they can recycle polyolefin elastomers or flexible polyethylene.
Step 1 FLAP INSTALLATION Main Flap
- Install the main inner flap onto the frame with the three center screws. The logo should face you, away from the frame.
- The flap material will start to deform when overtightening begins.
Step 2 U-Shaped Flap
- Install the U-shaped outer flap onto the frame with the two remaining screws.
- The magnets should face towards the main flap and the frame.
- Installation complete! If the flaps don't sit quite right off the bat, you can try massaging them into place.
Difficulty
Easy
Steps
05
Time Required
0.5 Hours
Sections
02
Flags
02
Parts
- 1 Dragon Main Inner Flap - flexible, rectangular piece with the Dragon logo
- 1 Dragon “U” Outer Flap - narrower flexible piece shaped like the letter “U”
- 5 thread-Forming Screws - ½” long screws
- 4 Frame Strike Plates - ½” x 1 ¾” steel plates with adhesive backing
Tools
- None
Installing an Additional Flap
Step 1 FRAME PREPARATION Remove Liner
- Remove the paper liner from one of the frame strike plates.
Step 2 Locate Recesses
- Locate one of the four rectangular recesses in the empty frame where the strike plate will go.
- You will want to to place the plate in the center of the recess lengthwise, and towards the frame opening short-wise.
Step 3 Adhere Strike Plates
- Press only one end of the strike plate down with your other hand, ensuring it stays straight.
- Run your finger across it, applying pressure, to ensure it has a good hold.
- Repeat for the other three strike plates.
Step 1 FLAP INSTALLATION Main Flap
- Install the main inner flap onto the frame with the three center screws. The logo should face you, away from the frame.
- The flap material will start to deform when overtightening begins.
Step 2 U-Shaped Flap
- Install the U-shaped outer flap onto the frame with the two remaining screws.
- The magnets should face towards the main flap and the frame.
- Installation complete! If the flaps don't sit quite right off the bat, you can try massaging them into place.
FAQ
|
Do you sell any replacement flaps? Yes, we carry replacement flaps for our doors. |
|
Can my large and small dog share this pet door? Yes, but before you purchase, make sure to follow sizing guidelines and measure your pet before purchasing. Make sure the size of the door is based off your tallest pet, but installed low enough for your smallest pet. |
|
How do I know what size will be best for my dog? You want to make sure that the top of your new pet door clears your dog's back by 1-2 inches minimum. Make sure the step-over is less than 1/3 of your dog's height in order to ensure that the pet door is as comfortable for your dog to use as possible. Lastly you want the width of the door to be wide enough to allow your dog and cat to go through without touching the sides. Here's a guide on how to measure your pet with tips on how to determine the correct size. |
|
I want to get the large pet door for my dog, but I am worried that a burglar could fit through it. Every Dragon Pet Door comes with a locking cover. This cover can be used to keep your dog in as well as keep intruders from entering your home. |
|
What’s the difference between a door mount and a wall mount? While the flaps and frames are mostly the same, each comes with different hardware that allows you to either install into a regular door or a wall |
|
Is there a difference between the single flap and the double flap? The double flap option provides increased insulation against the cold. Both options have magnets on the flap to keep the door sealed in wind. |
|
Where can a Dragon Pet Door be installed? The Dragon Pet Door has multiple Installation options, such as: in , as a Wall mount, Aluminum Sliding Doors, Vinyl Sliding Doors, Sash Windows, Vinyl Windows, and Horizontal Windows. |
Warranty
Dragon Pet Doors One Year Warranty
Dragon Pet Doors have a one-year warranty for normal wear & tear and manufacturing defects.
Easy to replace
A friend's puppy had chewed the original flap. Bought this replacement. It took me all of 5 minutes to remove the old one and put the new one in and now everything is perfect again.
United StatesVery easy to swap out
Easy to install, nice to have new flaps on door for winter
United StatesReplacement easy to install
Dogs broke first door outer flap. Also added better magnets to help keep the flaps closed when the wind blows. We will see if this modification helps.
United StatesTough as nails, unless you mess up.
Great , wife put the panel on the wrong side and the dog eat the flaps up trying to get in. The replacement flaps fit perfectly and are working as they should.
United StatesNot to bad
Good door the magnets Need to be stronger , about 1/2 the time have to push back against each other, and a good breeze with push open ! Make sure you buy 2 for inside and out
